2 Channel DA Module.
THE “LavryBlue” Conversion System — gives you 44.1, 48, 88.2 or 96kHz sampling frequencies. (Dan Lavry is against 192kHz sample rate.) LavryBlue converters feature Lavry’s exclusive CrystalLock, Acoustic Bit Correction and wide vari- speed operation.
LavryBlue can be configured in 2 to 8 channels A/D, D/A or a combination of both. ALSO MICPRE AND SAMPLE RATE CONVERSION MODULES ARE AVAILABLE NOW FOR THIS UNIT. MIX AND MATCH. MicPre Module takes up two spaces.
A/D cards allow the selection of various word lengths, Analog or Digital soft saturation and Acoustic Bit Correction, dither and noise shaping. Other features include LED metering, Reference meter bridge, Peak detection and front panel gain control. Conversion may use internal crystals or externaly lock to Word Clock or AES signal.
The D/A is easy to use. It automatically detects and displays the input data rate. The user can optimize for minimum jitter by setting the D/A to CrystalLock for stereo, narrow lock for multitrack applications and wide lock for non standard frequencies.
Analog A/D inputs and D/A outputs may be configured for balanced or unbalanced operation.
This system may be ordered in several A/D and D/A configurations ranging from 2 to 8 channels (up to 4 stereo channels) in each 1U 19 inch rack mountable chassis. Other optional configurations include synchronous Up Sample/Down sample converters and dual channel professional microphone preamps. This unit operates with AC power from 90 – 264 VAC, 50/60 Hz.
Chassis Required.
4 channels of LavryBlue A/D and 2 channels of LavryBlue D/A in the 1U LavryBlue chassis. Comes with the MSYNC board.
4 channels of LavryBlue A/D and 4 channels of LavryBlue D/A in the 1U LavryBlue chassis. Comes with the MSYNC board.
4 channels of LavryBlue D/A in the 1U LavryBlue chassis.
6 channels of LavryBlue A/D in the 1U LavryBlue chassis. Comes with the MSYNC board.
6 channels of LavryBlue A/D and 2 channels of LavryBlue D/A in the 1U LavryBlue chassis. Comes with the MSYNC board.
6 channels of LavryBlue D/A in the 1U LavryBlue chassis.
8 channels of LavryBlue A/D in the 1U LavryBlue chassis. Comes with the MSYNC board.
8 channels of LavryBlue D/A in the 1U LavryBlue chassis.
Lavry Engineering introduces DA10, a new stand alone stereo digital to analog converter. The half rack unit can receive AES or SPDIF digital audio on XLR, RCA and optical link.
In keeping with the Lavry Engineering tradition of innovation in the pursuit of excellence, the DA11 combines customer requested features with a flexible approach to controlling the stereo image. The patent pending >PiC< Playback Image Control™ allows the listener to adjust their position within the stereo sound field in a way that is unique to the DA11. Applications include adjusting the stereo width to create a headphone listening experience more like listening in a room with speakers, or moving the “sweet spot” with asymmetrical speaker placement. A full compliment of USB, XLR, RCA, and optical digital audio inputs offer flexibility in using computer, network music, or stand alone CD player sources, as well as studio equipment. Balanced and unbalanced output options are provided for ease in connection to a wide range of HiFi as well as professional audio gear. With the addition of infrared remote capability, the DA11 allows the listener to easily control important functions from the listening position with the added benefit of working with most universal remotes. The remote Mute function controls both headphone and main outputs, while a separate main output On/Off setting makes private headphone listening convenient. Like the highly acclaimed LavryBlack DA10, the DA11 offers extreme transparency and musicality in DA conversion with the ability to control speaker volume using digitally controlled ANALOG volume circuitry. This allows the DA11 to be connected directly to a power amp or powered monitors without a preamp for the ultimate in “straight-wire” listening. With unparalleled precision in channel matching throughout the volume range, this feature allows the listener to easily reset the volume to a known level for consistent enjoyment with minimal signal degradation. Like all other programmable settings, the Volume setting is retained in memory when the power is turned “off.” The DA11 features: Ultra low jitter mode to minimize source degradation. Patent Pending >PiC< Playback Image Control™. Accepts input sample rates between 30kHz and 200kHz Potentiometer-free digitally controlled analog volume circuitry. High power discrete headphone output. XLR, USB, RCA (Coaxial) and Optical (Toslink) digital inputs. Optional Infrared Remote control Power On/Off muting protection on Main and Headphone outputs Balanced or unbalanced outputs with Polarity Inversion Included XLR to RCA adapters for easy connection to RCA inputs
One ex-demonstration unit available. Comes boxed, with 6 month warranty.
In keeping with the Lavry Engineering tradition of innovation in the pursuit of excellence, the DA11 combines customer requested features with a flexible approach to controlling the stereo image. The patent pending >PiC< Playback Image Control™ allows the listener to adjust their position within the stereo sound field in a way that is unique to the DA11. Applications include adjusting the stereo width to create a headphone listening experience more like listening in a room with speakers, or moving the “sweet spot” with asymmetrical speaker placement.
A full compliment of USB, XLR, RCA, and optical digital audio inputs offer flexibility in using computer, network music, or stand alone CD player sources, as well as studio equipment. Balanced and unbalanced output options are provided for ease in connection to a wide range of HiFi as well as professional audio gear.
With the addition of infrared remote capability, the DA11 allows the listener to easily control important functions from the listening position with the added benefit of working with most universal remotes. The remote Mute function controls both headphone and main outputs, while a separate main output On/Off setting makes private headphone listening convenient.
Like the highly acclaimed LavryBlack DA10, the DA11 offers extreme transparency and musicality in DA conversion with the ability to control speaker volume using digitally controlled ANALOG volume circuitry. This allows the DA11 to be connected directly to a power amp or powered monitors without a preamp for the ultimate in “straight-wire” listening. With unparalleled precision in channel matching throughout the volume range, this feature allows the listener to easily reset the volume to a known level for consistent enjoyment with minimal signal degradation. Like all other programmable settings, the Volume setting is retained in memory when the power is turned “off.”
The DA11 features:
Ultra low jitter mode to minimize source degradation.
Patent Pending >PiC< Playback Image Control™.
Accepts input sample rates between 30kHz and 200kHz
Potentiometer-free digitally controlled analog volume circuitry.
High power discrete headphone output.
XLR, USB, RCA (Coaxial) and Optical (Toslink) digital inputs.
Optional Infrared Remote control
Power On/Off muting protection on Main and Headphone outputs
Balanced or unbalanced outputs with Polarity Inversion
Included XLR to RCA adapters for easy connection to RCA inputs