DPA 3506

Stereo Kit with two carefully factory-matched phantom powered (P48) condenser microphones. also includes a Stereo Boom and Acoustic Modification Accessories.


The DPA 3506 Omnidirectional Stereo Standard A-b Kit – Inc 4006. Superb matched pair of 4006-TL omnis with all the accessories.

The DPA 3506 is a complete 4006-TL Stereo Kit with two carefully factory-matched phantom powered (P48) condenser microphones. The DPA 3506 also includes a Stereo Boom and the complete range of DPA Acoustic Modification Accessories, all in a sturdy carrying case with a foam insert. The specially selected DPA 4006-TL microphones are matched within +/- 0.5 dB on both frequency range, sensitivity and self noise. The maximum phase response difference from 50 Hz to 20 kHz is 10 degrees. The high sensitivity, the low noise-floor and the extremely linear frequency response from 15 Hz to 20 kHz (+/-2 dB) of the microphone pair makes the DPA 3506 the perfect choice for all professional A-B Stereo recordings.

The main features of the DPA 3506 include:

Transformerless Output Stage – The transmformerless output stage further minimizes noise and provides enhanced detail and signal clarity
High SPL Handling – The DPA 4006 features an SPL rating of 143dB, allowing the microphone to capture high transients without peak distortion
Flat Frequency Response – The linear frequency response of 15Hz to 20kHz makes the microphone suitable for use in a wide variety of applications
Omni-directional Polar Pattern – The omni-directional pattern provides a generous, even signal response at the direct and off-axis sections of the microphone
Versatile – excellent for A-B Stereo recordings (pair), voice capturing, ambient/environmental and instrument recording
Principle of operation: Pressure
Cartridge type: Pre-polarised condenser
Power supply: 48 V Phantom power
Frequency range, ± 2 dB: 15 Hz – 20 kHz
Directional characteristics: Omnidirectional
Equivalent noise level A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Sensitivity, nominal, ±2 dB: 35 mV/Pa; -29 dB re. 1 V/Pa
Equiv. noise level ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
Capsule diameter: 16 mm (0.63 in)
Total harmonic distortion (THD): <0.5% up to 129 dB SPL peak, <1% up to 135 dB SPL peak Preamplifier frequency range: 20 Hz to 40 kHz ±1 dB Output impedance: <200 Ohm Cable drive capability: Up to 100 m (328 ft) Microphone length: 165 mm (6.5 in) Max. SPL, peak before clipping: 143 dB Weight (single 4006-TL): 150 g (5.29 oz) Dynamic Range: Typ. 120 dB S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 79 dB Connector: 3-pin XLR-M (Standard P48) Includes the Accessories: 2 x DD0254 Close-miking Grid, Trapezoid, Silver. 1 x UA0836 Stereo Boom with Holders. 2 x UA0777 Nose Cones. 2 x UA0638 Windscreens for 4003/06. 2 x L50B Acoustic Pressure Equaliser, 50 mm (1.97 in) Ball. 2 x L40B Acoustic Pressure Equaliser, 40 mm (1.57 in) Ball. 2 x L30B Acoustic Pressure Equaliser, 30 mm (1.18 in) Ball. 2 x DD0297 Diffuse-field Grid, Black. 2 x DD0251 Free-field Grid, Silver. 2 x 4006-TL Omnidirectional Microphones, P48


DPA Microphones

  • 5 Stars
  • 4 Stars
  • 3 Stars
  • 2 Stars
  • 1 Stars

Average Star Rating: 0.0 out of 5 (0 vote)

If you finish the payment today, your order will arrive within the estimated delivery time.


There are no reviews yet.

Be the first to review “DPA 3506”

Your email address will not be published. Required fields are marked *