DPA ST4006A Stereo Pair, Clips, Windscreens, Peli Case

The DPA ST4006A is a complete DPA 4006A Stereo Pair with two carefully factory-matched omni microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer.
The specially selected DPA 4006A microphones are matched within ±0.5 dB on both frequency response and sensitivity. The maximum phase response difference is 5°. The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.
The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphone pair makes the DPA ST4006A the perfect choice for all AB Stereo recordings. The design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory foam inlays.
The main features of the ST4006A include:
Carefully matched 4006A microphones
high sensitivity, low noise-floor and extremely linear frequency
Peli Case transportation and protection
Included in this kit: 2 x 4006A omni microphones, sturdy Peli case, holders, grids and windscreens
Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser
Frequency range: 10 Hz to 20 kHz
Max. SPL, peak before clipping: 147 dB
Weight: 163 g (5.7 oz)
Diameter: 16 to 19 mm (0.63 to 0.75 in)
Capsule diameter: 16 mm (0.63 in)
Length: 170 mm (6.7 in)